Morse Machine for Ham Radio
By Andrea Salvatore
This app teaches you to 'receive' Morse code.
It starts with two letters and automatically adds more when it understands that you are ready.
This is the easiest and most efficient way to learn Morse code as the app focuses on the practice you need next, instead of wasting your time with stuff you already know or confusing you with stuff that you still don’t.
The original idea comes from Ward K9OX (http://c2.com/morse/).
By default the app uses the 'Koch' method letter sequence and starts with the first two letters: K and M. But you can use any of the methods available and find the one that suits more your likings. There's also a training program for the top 40 words used during a CW QSO.
Around each letter you have a circle chart showing how high is your error score. It starts from 100% (full circle) and lowers as you start guessing letters right and increases when you are wrong or you take too much time to recognise them.
To start the training, simply press the PLAY button on the top right of the display.
At this point the app will start playing tones. Press the one that you think corresponds to the tone. If you are wrong, the app will let you know by playing an 'error' sound. If you are right, the app will continue by picking up another letter or word. Once you'll become good enough with the active letters, the app will enable a new one following the method selected.
You can decide to put the training lesson on hold by pressing the PAUSE button. Or stop it by pressing the STOP button. If you want to have an automatic stop after a certain amount of minutes, you can set the SESSION TIME in the settings.
While not training, you can tap on any key or word and listen to its tone to start to get used to it even outside of the training session.
You can access the SETTINGS by tapping the 'hamburger icon' on the top left.
You can look at your top 10 scores by tapping BEST SCORES in the left menu.
Important: you can use the app in both landscape and portrait mode!
Enjoy learning Morse code!
Learn or improve Morse code with Morse Trainer. Now with Farnsworth speed and Koch method.If you are a ham radio (amateur radio) operator or just want to learn morse code.With a lot of settings it is very comfortable to adjust Morse Trainer to your current level.The follow...
No ads, nags, or in-app purchases. No internet connection required. Fully offline app.Practice sending International Morse code with straight lever and iambic paddle CW Morse code practice oscillators app for Android smartphones and tablets. This app DOES NOT interface with your ham rad...
DroidRTTY is an application to decode and encode Ham Radio RTTY with the build in microphone/speaker or wired to your radio.A waterfall shows the frequency spectrum of 100Hz to 2500Hz. Just slide the waterfall slide on a RTTY carrier frequency and DroidRTTY will decode the signal.
NOTE: If you just discovered this application, please consider to install the Free version first.All the differences between the free and paid version are explained in the application user guide.This is the most significant upgrade to date. Please check my web site or read the ap...
No ads, nags, or in-app purchases. No internet connection required. Fully offline app.This Android app will train you to hear and send Morse code at 20 WPM using an approach very similar to the Koch method. In this app you learn first the vowels, starting with "a", then alphabetically t...
The CW Beacon app generates CW customized audio signals that can be sent periodically. By monitoring the reception of those messages on reverse beacon networks, you can verify how good is the performance of your radio setup (radio antenna) and/or popagation conditions over different bands....
The WSPR Beacon App is made to send WSPR signals using your Android smartphone/tablet as a signal source. All you have to do is use the audio out of it and pair it with the audio in of your rig (and set it to VOX).All you ha to do is:1) Set your CALLSIGN2) Set your LOCATOR...
A virtual keypad for your Elecraft KX3.With 54 buttons and 5 switches completely customizable, you’ll be able to create the perfect keypad for you ham radio operations with the Elecraft KX3.Each button has its label, command and color.Each switch has two labels (on/off), t...
*** NEW REDUCED PRICE! ***A fully featured QRSS (Slow CW) Beacon on Android. You can select a DIT duration from 1 to 60 seconds and choose one of the 3 supported modes: QRSS, FSK/CW and DFCW.You need to connect the audio out of your Android device to the audio in of your radio an...
THIS IS THE FREE TRIAL VERSION OF THE KX3 COMPANION APP. THIS VERSION EXITS AFTER 5 MINUTES OF USAGE AND DOESN'T SAVE SETTINGS, MACROS AND LOGS.UNINSTALL AND REINSTALL THE APP FOR THIS UPDATE!The KX3 Companion in an app that will let the power use of your Elecraft KX3 HF radio ea...
